Guide Click HERE
|Automatic Impulse Sealers
Scroll Down for PRICES Buy Quality its worth it !
We have been selling sealers since 1979.
Full Service & Parts Department in Los Angeles CA
|Schematic Drawings and
prices for all Automatic
sealer parts CLICK HERE
|Designed for the continuous sealing of
thermoplastic materials. Depending on the
model of the sealer, material up to 24" wide and
15 mil thick can be sealed. The seal width
ranges from 2mm to 10mm. Equipped with a
electronic timer and a an electromagnet.
Operates on impulse sealing, and controlled by
a plug-in transistorized circuit board. Once
correct settings have been established,
consistent seals will be maintained
automatically. Easy to operate.
For automatic operation, set the control on Auto,
and the sealing bars will have a continuous up
(open) and down (close) movement. The
frequency of the movement can be set by the
operator at his convenience. Just insert the
material to be sealed when bar opens and
remove when seal is done.
For manual operation, set the control knob to
Manual, insert the material to be sealed
between the two sealing bars. Press down the
foot switch to activate the sealing bar to close.
The sealing bar will be released when seal is
Sealers come with an electric foot switch and
WE STOCK ALL SPARE PARTS FOR ALL THE
SEALERS WE SELL,ELEMENT WIRES/TEFLON
KITS Call /Fax/ or email if you have any
questions. 1 year factory warranty all spare